Just noticed that Squadra Tuning in The Netherlands can now access race mode on non-QV cars, see
Squadra race mode
Squadra race mode
Race mode on non-QV
jwq2
201 - 220 of 1,035 Posts
Mine is Q4.
Joined
·
38 Posts
I live in Germany.
I also want to point out that I converted my original dna knob.
I didn't look at what the plate looked like when i opened it.
Joined
·
38 Posts
Do you have the original oem Race DNA knob of the q or do you convert your original DNA knob?
OEM, wanted to make sure I could do the Proxi config first before tearing the car apart. As others have said they changed 88 AC to 88 CC without changing the switch out.
Joined
·
38 Posts
Maybe is this our problem.
This week i will became the QV Race Knob but i‘m going in holiday on friday, so i can‘t test it for 3-4 weeks :-/
Joined
·
38 Posts
In germany is this not possibile in free version
Not having the switch and changing the PROXI config? Nope. I changed the PROXI and I have the OEM switch. No issues. Alignment went fine.
Joined
·
38 Posts
Which OEM switch do you have?
The OEM QV Race Mode Switch or the normal one converted?
Ha, yeah, sorry. Ti DNA not converted yet.
Joined
·
38 Posts
And did the microswitches and resistor?
Joined
·
38 Posts
I don‘t know :-/ , I was just working the plastic that I could keep turning the turner to the fourth point, but unfortunately I didn't look at what my platine looks like.
Joined
·
2,115 Posts
Maybe you have a compatible knob already? It's a possibility...
Nope, only two microswitches in mine. I pulled it apart the other night to look. Waiting on Dorifto to figure out what's needed for the selector mod, then it's game time.
Joined
·
38 Posts
I'm sorry I'm very confused now.
have you been able to unlock race mode with byte 88 to CC?
if yes with which switch, oem qv with race mode switch or converted oem normal giulia switch
This topic is getting confusing, I understand. Lots of different plots. Lol
I currently do not have race mode. I have successfully changed the PROXI config though, but I do not yet have a way to trigger the race mode using the selector. I will modify my DNA (non - qv) selector once Dorifto figures it out. More than likely it is only necessary to add a microswitch and resistor to the existing DNA selector in the 2.0t.
Others have purchased the QV RDNA selector.
I currently do not have race mode. I have successfully changed the PROXI config though, but I do not yet have a way to trigger the race mode using the selector. I will modify my DNA (non - qv) selector once Dorifto figures it out. More than likely it is only necessary to add a microswitch and resistor to the existing DNA selector in the 2.0t.
Others have purchased the QV RDNA selector.
Please let us know after you complete the install with RDNA switch if you gain an additional setting for the dampers. ThxThis is so awesome. After seeing this thread I immediately went to take apart my DNA knob. Unfortunately I only have 2 switches. I have an April 2017 build date with performance pack. I can't wait to get my QV knob.
201 - 220 of 1,035 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
