FYI, MAP, for NA, V1066 is available.
FCA | Home
FCA | Home
The update instructions provided by @jwq2 say no other devices should be plugged into other USB ports.Can you run the update if you have an iPhone plugged into the car for AA at the same time, or can no other USB port be in use when updating the maps?
Hmmmm.... same year as the Battle of Hastings. Let’s hope it's not some type of portent.FYI, MAP, for NA, V1066 is available.
FCA | Home
Thanks for confirmingThe update instructions provided by @jwq2 say no other devices should be plugged into other USB ports.
*
This should give 2 files, a .dct file (license) and a .bin file (map)
*
- place the 2 files on root of USB stick
- start engine, switch off auto start/stop
- place stick in USB port car. Don't use usb port in rear, as this is power only
- make sure there are no other devices in any of the other USB ports
- select <settings> <system> <maps update>
- update should start, takes approx 70 minutes on "old" 1st gen hardware, 30 minutes on "new" 2nd gen.
I’ve got an all nvme flash storage array from netapp, model ef600.10 gigs... what on earth are you guys using to move that thing to your nav?
You had me looking into history...now i knowHmmmm.... same year as the Battle of Hastings. Let’s hope it's not some type of portent.
Serious? Are you still living in 2003??10 gigs... what on earth are you guys using to move that thing to your nav?
Or by buying a new 3 year subscription via the dealer for approx E 130,-..... Otherwise map update only available via dealer anymore.
It’s 21,6gb dct file and 1 kB bin file. I use a 32gb Memory stick.How big is the map (.bin) file ?
The update instructions provided by @jwq2 say no other devices should be plugged into other USB ports.
*
This should give 2 files, a .dct file (license) and a .bin file (map)
*
- place the 2 files on root of USB stick
- start engine, switch off auto start/stop
- place stick in USB port car. Don't use usb port in rear, as this is power only
- make sure there are no other devices in any of the other USB ports
- select <settings> <system> <maps update>
- update should start, takes approx 70 minutes on "old" 1st gen hardware, 30 minutes on "new" 2nd gen.
i was able to update with AA connected.Can you run the update if you have an iPhone plugged into the car for AA at the same time, or can no other USB port be in use when updating the maps?
I may try it theni was able to update with AA connected.
it says update take about 1hr and i left the car running while i was getting 1st covid19 shot.
took about 30 minutes to get to vaccine site + 30minutes for me to get back to the car from getting vaccine.
when i came back, it was done.
it should be the other way round, 1 kb dct file, and a large bin file.It’s 21,6gb dct file and 1 kB bin file. I use a 32gb Memory stick.
I will, thanks 👍it should be the other way round, 1 kb dct file, and a large bin file.
On my "old" European system the mapfile is around 11 Gb .....
Assuming you just made a mistake listing, the mapfile still seems quite big.... Maybe someone with a new system can chip in
For European cars, you will probably get more response on the UK forum here, seeing as that you seem to be in Europe :
Afa owner : Giulia
Updates
Yes, absolutely.You can update while driving? My other car didn't allow me, I had to be parked.
yes, just start the update whilst stationaryYou can update while driving? My other car didn't allow me, I had to be parked.