Just downloaded will install when I go for a drive later.

 

Downloading now

 

how do i know what navi system i have?

 

3D Connect NAV MY20

 

Thank you, hopefully the 3d my20 comes out soon.

 

Not sure what exactly you are saying, but below is the latest version available for download on MY20 cars.

 

What I'm saying is only up to model year 2019 has a new map update. MY 2020 and 2021 have not been updated on the fca map site yet with a new download. 2020.06 is from last July.

 

When is V1066 from? Not very obvious to me.

 

What Nav in the 18 with AA?

 

3D Connect Nav.
AA has nothing to do with it.

 

I downloaded it the other day. Meant to install it. I am glad they keep updating.

 

10 gigs... what on earth are you guys using to move that thing to your nav?

 

I’ve got an all nvme flash storage array from netapp, model ef600.

 

I just did the update. Took about 30 minutes. @InfiniteLoop all you do is format a USB drive (16GB what I used) to NTFS and copy the 2 map files to it. Plug in USB into your car and Update through the infotainment settings. Car has to be on, so go for a drive or something while it is happening.

 

Eh I just don't have a stick that big ... I'll have to get one.

 

$5 on Amazon should get you one. Less than $10 in any store.

 

So you are saying there are finally updated maps out? People have been asking for years.

 

They have been available for NAFTA for quite some time now (since 8 or 9 months )
(Europe has been available from the start of course)

 

Can you run the update if you have an iPhone plugged into the car for AA at the same time, or can no other USB port be in use when updating the maps?

 

The update instructions provided by @jwq2 say no other devices should be plugged into other USB ports.

*
This should give 2 files, a .dct file (license) and a .bin file (map)

• place the 2 files on root of USB stick
• start engine, switch off auto start/stop
• place stick in USB port car. Don't use usb port in rear, as this is power only
• make sure there are no other devices in any of the other USB ports
• select <settings> <system> <maps update>
• update should start, takes approx 70 minutes on "old" 1st gen hardware, 30 minutes on "new" 2nd gen.

*

 

FYI, MAP, for NA, V1066 is available.
FCA | Home

Hmmmm.... same year as the Battle of Hastings. Let’s hope it's not some type of portent.

 

You had me looking into history...now i know

 

Good to see still nothing on the maps front for Oceania. At least TomTom Amigo using AA kinda looks like the factory system

 

Does anyone have recent eu maps (10xx) for the 8.8" screen downloaded and willing to share? I still have the original 2016 v.971 maps in mine. Have updated infotaiment successfully to fw. 2.010.41. Otherwise map update only available via dealer anymore.

 

..... Otherwise map update only available via dealer anymore.

Or by buying a new 3 year subscription via the dealer for approx E 130,-

 

Have problems updating giulia my20, I have downloaded the bin and dct file,
put the stick into usb in the car but gets a message not enough free space in the system, and it won’t download.
anyone with input?

 

I have the same problem
Follow this

Why Does My USB Drive Say It’s Full When It’s Not? - Premium USB

One of the most common issues (and the easiest one to fix) is when your USB drive reads as full when it still has room on it!

www.premiumusb.com

You usb it divided to take 4gig file, you need to change it following the link suggestion. After select the bigger volume you can. It worked well for me.

 

How big is the map (.bin) file ?

 

It’s 21,6gb dct file and 1 kB bin file. I use a 32gb Memory stick.

 

You can update while driving? My other car didn't allow me, I had to be parked.

 

Yes, absolutely.

 

37 minutes on a USB 3 stick. I'd say that's not bad at all.

 

Took about the same on my USB 2.

 

Question.
Can you drive the car while updating the maps as the info system is telling me to keep car running but not in motion?

 

you have to start the process while the car is stationary, but can drive while the update completes.

 

Having a devil of a time getting the car to see the files as legitimate ... probably something with the formatting I'll play with it later.

 

When I downloaded the maps from the F.C.A. site, I changed the name of the file slightly on my computer.
so, I could locate the downloaded map file on my computer in my "download folder" easier.
The car wouldn't recognize the file with the name change.

And you are right, as mentioned earlier, your stick needs to be formatted to NTFS files,
before you download the maps onto your memory stick.

 

Did you download the license file too?

And are you sure you choose the right nav unit?

 

Yes and Yes.

I'm fairly tech savvy so I did a OSX download I think the stick is NTSF but Apple may have done something to add to the files as they often do.

I'll just use my windows box and reformat the drive.

 

Yes and Yes.

I'm fairly tech savvy so I did a OSX download I think the stick is NTSF but Apple may have done something to add to the files as they often do.

I'll just use my windows box and reformat the drive.

It only works with the usb formatted as Windows NTFS .....
On Apple, you can use format as MacOS extended (journaled)

 

I need to go on a roadtrip to drive for 37 minutes anywhere

 

Did mine today. Exactly 37 minutesn
I bet it's like 2 minutes of upload and 35 minutes to make it seem like it's doing a lot of work so people thibk the system is important.
Lol

 

Followed @hownowcb 's instructions, but still getting this error. Have tried reformatting flash drive several times. Anyone else have a similar problem?
'19 Giulia Ti Sport / Mac OS / Flash drive OSX journaled.

thx!

 

Followed @hownowcb 's instructions, but still getting this error. Have tried reformatting flash drive several times. Anyone else have a similar problem?
'19 Giulia Ti Sport / Mac OS / Flash drive OSX journaled.

thx!

View attachment 110714

Your first, upper photo explains (granted, not very explicitly) that you should try to reinstall the two files onto a flash drive. If you're not already, I'd recommend using a 32gb drive. USB version doesn't matter. It's really important that you use Disk Utility to erase the drive; don't just drag files or folders already on it into the Trash. Choose "erase" and reformat the disk Mac OS Journaled. Then only drag the two files: USA_Canada_and_Mexico-102913.meta.dct and MAP50231.bin onto the drive and nothing else. Your drive should look exactly like this:

Your problem could have been as simple as a single bit read error, so just try again, by reinstalling the files onto a fresh drive. At least your car recognizes what you're trying to do!

FYI: I named my flash drive "AR MAPS", but name doesn't matter. Just don't drag the files inside a folder, and don't create a folder on the flash drive. I put my iPhone into "Airplane" mode just to be sure a call wouldn't in any way interrupt the update process!

 

anyone with MY20 or MY 21 lost voice commands on the nav with the latest update.