[ferraripete]

All OEM exhaust on all the Giulia models except for the Quadrifoglio, has fake tips!

really?? this has me sad as a long time alfa owner / lover. lame, lame, lame!!!

 

[alfagtv100]

That is awesome.
Looks fantastic, sounds right (not OTT) and the pops are sweet.
Great job. Well done.

 

[Papa Gallo]

NO WAY are second tips on factory dual tip Giulias fake ...
have a scroll through these cars and check the rear tips, both have carbon on them

http://demo.alfaromeo.com.au/listing/demo

this is where you may be confused, there is an optional mod kit where you can add a second exhaust tip to a single exhaust Giulia ( 200hp models are single tip) and the second tip is a dummy, but ALL cars with dual exhausts are dual exhaust cars ... diesel and Veloce

 

[Papa Gallo]

All OEM exhaust on all the Giulia models except for the Quadrifoglio, has fake tips!

cough*bullshit*cough

 

[neiltyme]

I think he meant that the exhaust itself doesn’t come out of the bumper and stops short and most of our cars have a fake chrome tip at the end. That part is true.

 

[MacGeek]

The reasons why many contemporary cars, Giulia and Stelvio included, have the exhaust tips integrated in the bumper cover essentially boil down to style and ease of assembly (hence, ultimately, cost).

The exhaust must be free to move relative to the body, so designers and engineers must leave a certain amount of clearance around the tip, when it's mounted on the actual exhaust line. This will limit the diameter of the tip, or lead to ungainly cutouts in the bumper cover. With the tips on the bumper, you have no empty space between the chrome ring and the bumpers. That makes designers happy. The required clearance now becomes the space between the chrome tip and the actual exhaust inside (this is why they're so different in diameter).

Also, with the classic exhaust-mounted tips, care must be exercised during assembly so that the tips are correctly centered relative to the bumper cutouts (Ferrari had special tools for the 360 and F430 for that purpose), and be at the correct level relative to the bumper - i.e. not sticking out or being recessed.

Finally, bumper-mounted tips allow for product variations at minimum cost. Want to introduce titanium tips, black tips, change their shape? No need to have a specific entire exhaust made by the supplier. Just order new tips.

That does not make them fake, as long as the actual exhaust pipe ends are inside the bumper-mounted tips, which is the case in the Giulia and Stelvio. Ferrari has been doing the exact same thing since the California.

 

[JRCO83]

Hi Seropdiablo204

I have been wrapping my brain around ideas to make the exhaust of my Giulia sound sportier and ended up coming across this thread. What an awesome idea!

Like you, I want my Giulia to be loud when it matters and quiet when cruising around town or to/from work etc so I think you've developed a great system.

I am in Australia so I'm going to try and replicate what you've done with a similar muffler (no borla dealers here) but just wanted to know if you managed to put the plastic covers back under the exhaust and if you've noticed the trunk getting hotter or any other side effects?

Now that you've driven with the system for a while, would you mind sharing your thoughts on it? do you love it as much as the first day? has it gotten louder?

Thanks in advance for taking a few minutes of your day to help me out!
Cheers!

 

[Dorifto]

Quick question where did you buy the exhaust tips, which look that good at this angle?

 

[ScaryFatKidGT]

So I had to make an account just to comment on this, looks frigged sick especially with the deck lid spoiler, hopefully my new job goes well so I can get one of these. I also really hope they release the Veloce with the claimed 350hp closer to $48,000 than $58,000.... one can only hope.

Also they have been making fake tip exhausts like that for awhile, my friends 06 MazdaSpeed 6 had those.

Quick question where did you buy the exhaust tips, which look that good at this angle?

I think it's custom, bought the tips and welded them at the correct angle.

 

[ALFATECH]

^Agree, they look like he bought 4 tips, then had the pipe split and had them welded on at the correct angle.

I think it sounds great and looks awesome with the quad tips, but I’m wondering why the pipe entry/exit in the muffler is staggered?

And with regard to the cost of an aftermarket exhaust, most are costly due to the fact that they’re fully stainless and easy to install and remove, this system appears to be aluminized steel pipe, all welded together. Nothing wrong with it, just offering a little reasoning to the cost of a system purchased as opposed to custom. I remember when I got a cat back for my ‘01 Lightning, it was over $800 and was basically a muffler and side exit pipes! But it fit perfect, had great sound, and a lifetime warranty, so not bad overall.

 

[Gordon Johncock]

Hi guys,

Bought my UK Giulia earlier this year, my first port of call was to squeeze as much out of her as I could. Celtic tuning offered a stage 2 tune up bumping the stock 200hp to 320hp. Happy that the gear box diff and back end can handle this, this got done once she’d done about a 1000miles, love it using the DNA shows the differences in the programming levels. It’s such a slippery beast in Dynamic.

However I’ve digressed. I too wanted a quad set up. The problem I found was that the UK market for aftermarket parts was very restricted. Most parts only had a a dual tip rather than the quad, they also muffled the exhaust note, so there’d be no increase in the tone or volume. I blame Brexit, everyone else seems too.

So long and short after sourcing a carbon rear diffuser. I have now got a quad tip pipe. How? Well, I decided to beat European regs. But maintained UK noise emissions. To do this I was going to need to have something bespoke made. I employed the services of a company near St Albans called EMP. Who subsequently relieved me of £1,200.00 of my finest UK pounds. Great that’s not cheap....

Now the problem I have is I do a lot of motorway driving so I needed something that could change pitch on. This was the main reason for the cost as I included a pressure bypass valve. This works both electronically at the push of a button but also semi opens under pressure to maintain back pressure in the exhaust, if I suddenly dump the throttle open to overtake those pesky BMW’s.

Problem 2 EMP had never done a Giulia exhaust, so as much as he was confident it would be the preverbial dogs dooh dar’s. He wouldn’t guarantee it’s sound or behaviour. That’s an expensive risk for sure for me. Either way one I took. I wanted quads.

The end result is now here and on the car. I have a 3” CAT back system with Mandrel bends on tig welded s/steal. This runs to the Bypass valve allowing for the exhaust to be directed away from the silencer. At the push of the button I can direct it through the back box keeping the noise to a level I don’t end up with a migraine from. However as noted if I drop the hammer it forces the valve open by sensing the increased exhaust pressure, this in turn reduces any additional lag.

I have to say I am really happy with the work done.

It has been so worth it and I have to say the car shows I go to it is definitely a head turner, while being the centre piece at a show at Silverstone.

 

[Gordon Johncock]

At a recent photo shoot

 

[Dorifto]

welcome to the quad tip Club :grin2:

 

[BluGiul]

To the OP - great job. Sounds slightly bass-ier than the Magnaflow I have on my Ti car.

The Magnaflow fits into the stock bumper cover/ splitter, but the tips are real on the Magnaflow (not bolt ons like the OEM).

When I took my car in for service, my service adviser heard my car coming in (but not seeing it) and thought it was the QV, he said it sounded that good. I don’t think it sounds perfect like the QV, but any good aftermarket exhaust will make the Ti sound fantastic.

I have no idea why Alfa didn’t offer a sport exhaust option on this car.

 

[Diego1025]

Looks awesome! I already have the muffler delete and was quoted by the shop around $200-$250 to get this quad mod done! Might have to consider it!

 

[MINIME]

At a recent photo shoot View attachment 79692

Mind sharing where you picked up that CF diffuser? BTW. All the exhaust mod photos shared by all posters look super slick. Impressive for sure.

 

[Seropdiablo204]

I actually have the exhaust listed for sale now for much less than getting it done custom, check out my selling thread

For sale link

Or my eBay link

Alfa Romeo Custom Quad Borla Exhaust Giulia 2.0 Ti | eBay

Find many great new & used options and get the best deals for Alfa Romeo Custom Quad Borla Exhaust Giulia 2.0 Ti at the best online prices at eBay! Free shipping for many products!

rover.ebay.com

Can I ask what exhaust shop did you go to? We're neighbors i live in Glendale right across from the alfa de

Maybe we do a group buy LOL, I'm in LA as well.

 

[Seropdiablo204]

That is awesome.
Looks fantastic, sounds right (not OTT) and the pops are sweet.
Great job. Well done.

Thank you!! I really appreciate your opinion and comment

 

[Seropdiablo204]

Not trying to hate but that doesn’t give the QV look, my goal was to be as close to the QV look as possible with the staggered look and pipe size and everything
Looks better than stock though

Hi guys,

Bought my UK Giulia earlier this year, my first port of call was to squeeze as much out of her as I could. Celtic tuning offered a stage 2 tune up bumping the stock 200hp to 320hp. Happy that the gear box diff and back end can handle this, this got done once she’d done about a 1000miles, love it using the DNA shows the differences in the programming levels. It’s such a slippery beast in Dynamic.

However I’ve digressed. I too wanted a quad set up. The problem I found was that the UK market for aftermarket parts was very restricted. Most parts only had a a dual tip rather than the quad, they also muffled the exhaust note, so there’d be no increase in the tone or volume. I blame Brexit, everyone else seems too.

So long and short after sourcing a carbon rear diffuser. I have now got a quad tip pipe. How? Well, I decided to beat European regs. But maintained UK noise emissions. To do this I was going to need to have something bespoke made. I employed the services of a company near St Albans called EMP. Who subsequently relieved me of £1,200.00 of my finest UK pounds. Great that’s not cheap....

Now the problem I have is I do a lot of motorway driving so I needed something that could change pitch on. This was the main reason for the cost as I included a pressure bypass valve. This works both electronically at the push of a button but also semi opens under pressure to maintain back pressure in the exhaust, if I suddenly dump the throttle open to overtake those pesky BMW’s.

Problem 2 EMP had never done a Giulia exhaust, so as much as he was confident it would be the preverbial dogs dooh dar’s. He wouldn’t guarantee it’s sound or behaviour. That’s an expensive risk for sure for me. Either way one I took. I wanted quads.

The end result is now here and on the car. I have a 3” CAT back system with Mandrel bends on tig welded s/steal. This runs to the Bypass valve allowing for the exhaust to be directed away from the silencer. At the push of the button I can direct it through the back box keeping the noise to a level I don’t end up with a migraine from. However as noted if I drop the hammer it forces the valve open by sensing the increased exhaust pressure, this in turn reduces any additional lag.

I have to say I am really happy with the work done.

It has been so worth it and I have to say the car shows I go to it is definitely a head turner, while being the centre piece at a show at Silverstone.

 

[Seropdiablo204]

Thank you, my muffler shop was going to put on a magnaflow for free instead but I really wanted the borla brand, in actuality, the inside flow design is very similar, I think they use different packing materials but it’s all the same
I had people 100% fooled into thinking it was a QV hahah it’s funny

To the OP - great job. Sounds slightly bass-ier than the Magnaflow I have on my Ti car.

The Magnaflow fits into the stock bumper cover/ splitter, but the tips are real on the Magnaflow (not bolt ons like the OEM).

When I took my car in for service, my service adviser heard my car coming in (but not seeing it) and thought it was the QV, he said it sounded that good. I don’t think it sounds perfect like the QV, but any good aftermarket exhaust will make the Ti sound fantastic.

I have no idea why Alfa didn’t offer a sport exhaust option on this car.