Great info, thanks Did you manage to activate the Auto-on Comfort function?
What is your CSWM version?
When changing the HVAC module, what did do you need to do? Only procsi alignment or anything else?

 

I did proxy only. CSWM is 5.0.
I am looking for used one with newer firmware.

I ordered Remote Start Key in few days and I hopefully will have it in few days to check. I will give You info if HVAC is enough or do You also need newer CSWM.

 

Thanks for the effort, please keep us updated.

When you look for CSWM, make sure you select the proper one for your options.
Check your current part number and select the updated version based on that.

These are the pairs:
Old New
50537138 - 50557149
50537139 - 50557150
50537140 - 50557151

There already a few people with CSWM 9.0, remote start, menu already appears, but Auto-on Comfort doesn't work for them. According to our current understanding, new HVAC is needed, hope you can prove it.

 

Quick question to confirm, you can use a used seat module and not a new one? If so, what year had the newer module?
Thanks for an informative post!

 

You can use a used module, year will most probably be 2018 (maybe end of 2017) or newer. To be sure, do not look for year only, look for part numbers mentioned in earlier post.

 

You're looking for a build date not a year. Fire US market, 05/2018 is safe, as I have a stelvio with everything working out of the factory. Perhaps others can chime in to get more precise. Build date can be found on drivers side door jam sticker.

 

Mine is 08/2017 EMEA and I have the old module with SW08.01

 

Hi guys, have to recover this old thread due to my issue with Easy Entry option. My US Giulia has this option at infotainment but it doesn’t work at all. Doesn’t matter if it enabled or disabled. Car’s production date is 07/18, it has latest radio firmware 90xxxxx. Recently car’s region was changed from US to Europe, on US region car this issue was too. During the region changing also was Seat Calibration function done, but got nothing, the driver’s seat doesn’t move((

 

If you want to enable it, be aware it depends on where the standard position of the driver seat is compared to the B-pillar, it only moves if the position is ahead of the B-pillar

 

Yep I know about that condition and I've tried to place the driver's seat in to closest position to the wheel but still nothing (((

 

You'll need to replace the seat module under the driver's seat.

 

Hm, I thought a mid. 18’s year production models should have the proper module especially when this option is enabled in the infotainment system from the factory 😬

 

Two ways. MES without SWG should allow you read access. Check the CSWM and it will tell you the version. 2nd way is to take a picture of the CSWM module under driver's seat. It will have the HW and SW version.

 

yes-yes, I've tried to understand where do I need to find this info exactly, at Body module or somewhere else?

 

It is under the driver seat, close to the front of it. It a black box, roughly 8cmX12cm. Just read the part number. 505Xxxxx. If the big X is 5, you have SW9.00. If it is 3, you have something older.

 

I’m a man with both left hands for screwdrivers or any other tools so for me it’s much easier to check this number via the MES, just need to know what module do i need to check 😬

 

You don't need to disassemble anything, just look under the seat with a mirror or the selfie camera on your phone if you want to do it with MES, look for this:

System: Climate Control
Control Module: Comfort seat and wheel (CSWM) Bitron

 

Strongly appreciate your help. Will get back with this question once get back to Kyiv and reach my car again, decided to leave with my family the capital prior the Independent Day holiday for safety reasons

 

[

Ciao se l'auto è americana dopo aver messo Europa devi togliere dei riduttori dalle guide del sedilere e poi fare la calibrazione del sedile.[/QUOTE][/QUOTE]

 

[

Ciao se l'auto è americana dopo aver messo Europa devi togliere dei riduttori dalle guide del sedilere e poi fare la calibrazione del sedile.

[/QUOTE]
[/QUOTE]
Wow… don’t even know about such kind of stuff. The calibration procedure was done but haven’t here about this plastic stoppers before

 

Finally i’ve won in the struggle with Easy Enter option. Everything was useless cause I’m sitting out of the operation point fir this function but who cares?😂😂😂😂 Now i’ve got one issue less at the car. Grazie di @luvec74

 

Salve, qualcuno ha attivato il menù confort conducente su ETM e display touch my20,? Dopo l’ upgrade da my19 a my20 è sparito il menù 🤔

 

Hi.

I've been following this thread for a while and ended up purchasing the CSWM of Ebay from a 2019 car with 9.00 for my 2018 Giulia (made 07/17). I made sure I got the correct part per the info above: 71390 -> 71500

I am using AlfaOBD as I don't have an Apple device. I was able to enable the Easy Exit option and it actually works to disable it.

However the odometer flashes and it seems to think there's an incorrect module installed even after proxy alignment.

I don't see CSWM calibration in AlfaOBD.
Ant thought on how to fix this issue?

Thanks.

 

Did you also get comfort options, heated seats and steering wheel when remote start?

 

Update:
Looks like AlfaOBD can't do proxy alignment at least in my case. Ended up purchasing MultiEcuScan, did proxy and issue is fixed.

 

Hi, does anyone have a photo or a proxy file of an American or Canadian Giulia my20/21/22, or in any case with Remote Start to read the driver comfort menu byte?
or do you know the configuration of bytes 78 and 148 for driver climate comfort on an ETM my20?
I had enabled everything on the ETM my19 and I had it on the display now comfort works with my20 but I no longer have the menu.
thank you

 

Tried the easy entry/exit disable in byte 74 today. Yes, seat movement was disabled (late 2018 build, SW 9.0 in CSWM) but no menu showed up in display. My car doesn't have nav and entertainment software is .059. Can't update that so I'm out of luck to ever get menu. Oh well.

 

If I got you right, you have Gen1 ETM, you can update to 002.010.041 or above and you will get the menu. Added bonus will be bigger reverse camera screen.

 

To tell the truth, I don't know. All of the other threads that mention entertainment software versions appear to be discussing systems with navigation, which I don't have. In my ignorance I tried to get Walnut Creek Alfa to update the software and they said it is not possible. Since I have never seen any reference in the forum to my version of the software, I think they are correct and the non-nav system with the 8.8" screen has no updates. Software version existing is 059.000.002.

 

It doesn't matter if you have navigation or not. There are several versions of ETM, but all take the same software. The actual functions are set by procsi and internal variables. Basically you always flash the full software, than the system decides which lines of codes or parameters are used.

If you have MV059.000.002, that means that this a Gen2 ETM and that has two updates available (MV085 and MV090) both should have the easy entry menu. It is updated with a USB stick. Please do your research before updating as according to the service bulletin, several other modules need to be updated as well and those can only be done by the dealer. If you don't do those, you can run into incompatiblity issues (I don't recall anyone actually reporting it), so proceed with caution on your own risk.

 

Very interesting and informative, thanks. I've read the update threads many times and even created a USB stick but got cold feet regarding the other modules needing updating. I guess I could try it and if all that updating is required I could go back to the old software version.

 

You cannot go back, so maybe check with dealership first, if you have the latest version on all these modules:

 

Thanks, I will check with dealer. Build date is March 28, 2018 so I'm sure I would need updating of some or all of those modules. Thanks for the help!