Joined
·
104 Posts
Is there a DIY out there? Looking to do this ASAP since the giant telephone cord going into glove box is pretty annoying.
Radar Detector Fuse Box Hardwire
1 - 9 of 9 Posts
Joined
·
2,000 Posts
AddaCircuit fuse holder was what I used on my TSX. Plugged it into a key hot accessory fuse slot and ran the wire under the rubber weatherstriping/trim around to the overhead by the mirror. The lack of a tinted strip at the top of the windshield makes that a less "low vis" install on the Giulia thou.
Joined
·
547 Posts
Joined
·
104 Posts
That is mirror install, not fuse box
Joined
·
547 Posts
Why run it all the way down to the fuse box anyway? You have switch power at the mirror!
Joined
·
104 Posts
Because I have the giant Escort Direct Wire Smartcord that I used to go from behind the mirror in my E92 to the fuse in the glovebox. I'd rather not buy something new and it's easy enough once you find the right fuse. Right now having trouble finding something for the ground loop.
Joined
·
547 Posts
Tortious I just sent you a PM.
Joined
·
112 Posts
@TortiousTroll - I used this spot underneath the fusebox. If you move some of the wire bundles, its easy to find. Works great.
Attachments
Joined
·
3 Posts
I've done a couple of these installs. It's pretty straightforward. Here's a radar detector hardwire tutorial I've written up. I've also done a video as well if you'd prefer to watch instead.
https://youtu.be/aEr52utks2c
https://youtu.be/aEr52utks2c
1 - 9 of 9 Posts
Join the discussion
