Alfa Romeo Giulia Forum banner

Official 1/8 mile, 1/4 mile, 40-100mph, 0-130mph, 60-130mph dragy and timeslip drag database. How fast are you?

146K views 1K replies 61 participants last post by  cphilippou 
#1 · (Edited)
I saw the great thread on 0-60 times and in other forums we had cool drag time databases so I thought I'd make one thread where we can see acceleration data.

Here is a link to the database....


Submit your times. If they are at a track or via dragy, they'll be accepted. Lets get a good database going.

Format for Submission. Complete all parts of the entry you have. If you only got a 1/8 mile time, thats fine just only put that data. If only 40-100mph, thats cool too. Just only put that data.

Driver: Your user ID
Car: QV or 4 Cylinder
Drive: RWD/AWD
Fuel: 91, 93, E30, E85, 100, 104
Density Altitude: you find this on the dragy slip or if you were at a track you use dragtimes DA calculator
60ft:
1/8 Mile ET:
1/8 Mile Trap Speed:
1/4 Mile ET:
1/4 Mile Trap Speed:
40-100mph:
0-130mph:
60-130mph:

If modified include:
Turbo:
Tune:
Intake:
Downpipe:
Exhaust:

Cooling:

Last, thing is post a photo of your timeslip or dragy slip with your post.


Example:


Driver: bhvrdr
Car: 4 cylinder
Drive: RWD
Density Altitude: +940
60ft: 2.06
1/8 Mile ET: 8.68
1/8 Mile Trap Speed: 81.69
1/4 Mile ET: 13.49
1/4 Mile Trap Speed: 102.18
40-100mph:
0-130mph:
60-130mph: 19.48

Stock Car

100163



100165
 
See less See more
2
#203 ·
I hope dragy dev team will add in their next release runs backup to cloud and compare feature. When I moved from s8 to s20 I have lost many results as it is stored in phone storage and not in cloud or profile.
This what I requested from them and they said that will consider it on the list of improvements.
i agree. I’ve had many runs erased on dragy And the app is super slow lately.
 
#204 ·
I knew I would get it under 5 secs on 40-100mph. It has at least a 4.8 in it since I had to change lanes mid run. 60-120 isn’t bad at 6.28. I can also get that down to low 6s with no traffic. Car is dialed in now. Cool temps. Low DA. I’ll run her tomorrow and hoping for 11.2s@127-128mph.
 

Attachments

#219 ·
4s range should be easily achieved, especially as we can benefit from good start with ours AWD, but it needs some practice I believe and good, flat road.
My Giulia Q4 Veloce is also not super light warrior due to extras and equipment on it. When I weighted my car with 95% fuel in tank it shows 1660kg (3660lb) which has also impact on results I believe.
Anyway good luck for you as well ;)
 
#222 ·
anything is possible! I see you on dragy doing your thing representing the 2.0 giulias! A 4.2 0-60 might be a 3.99 with 1ft rollout? But most likely need bigger turbo. And less weight. Even running a mid 4s on street is not slow. Many high power cars do exactly that on street. Hellcats are around 4.2 with spin. 392 charger about the same. M3, mustang 5.0 similar times. So mid 4s is fast on street. Of course those cars after 330’ are pulling away.
 
#241 ·
Well maybe indeed without checking real figures in performance about stock filter vs. sprint it is hard to believe that more noise could give more performance hp/nm and more speed. When I was installing sprint I was shocked that is so small comparing to stock and I started to think if its really good to have it. I have to check how it will work with stock one to be sure.
 
#244 · (Edited)
Well it is faster than my 0-60s lol.

Man, I tried hard tonight and almost made it. 5.01 best 0-60 (4.83 1ft). Looking at my JB4 logs, I dunno whats going on but I am only boosting to like 22PSI which seems low... Can anyone confirm what they are getting boost wise with their piggyback? Also, I had a 5.06 run with a 4.73 1ft which is interesting. 13.49 was my best 1/4.

@kozak @Tomson I am definitely launching hard and am beating you 0-30, but we are even at 0-40 and you just out pace me on the top end. Again, I think this is to what is going on with my boost as I am not sure why I am not boosting higher than 22 PSI on these runs. I have seen my car hit higher boost on hotter days. Very strange.
103174
103175
103178
 
#246 · (Edited)
I have checked with torque and for me max boost was 1.6bar which is 23.20psi. However, not entirely sure if torque app is logging everything acurrate.Maybe I have not build boost up enough
Speedometer Auto part Digital clock Font Clock

Antway I have found on this forum thread followed by guys from EC and they said that torque pro app is great but it cannot measure boost properly via obd II port and it will show always max of 22.x psi
 
#248 ·
Yeah it's strange. Looking at JB4 logs, I saw last week I was hitting 27psi, but last night all I ever saw was 22 tops. JB4 shows it putting more boost compared to what ECU is requesting, so it appears to be doing something. I'm going to do more testing tonight. I'm on the beta 5 firmware.
 
#254 ·
compare with dragy. I still don't know from where squadra take speed. Cluster ?

Wysłane z mojego HD1913 przy użyciu Tapatalka
idk either. Has to be cluster. It’s pretty spot on for some runs. Others it’s not even close. Anything short distance it’s off. Longer runs seem pretty spot on. 1/4, 0-120 and 60-120 it’s decent. 0-60 forget it. Apparently I’m running 2.46 0-60 times lol.
 
Top